| No. | Brand | f | h | A | T | B | C | L | J |
| HYDNUT320-INCH | FAG | - | - | 40.5 mm | - | 33.4 mm | - | - | - |
| HYDNUT900-HEAVY | FAG | - | - | - | - | - | - | - | - |
| HYDNUT800-HEAVY | FAG | - | - | - | - | - | - | - | - |
| HYDNUT710 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT420-INCH | FAG | - | - | - | - | - | - | - | - |
| HYDNUT740 | FAG | - | - | - | - | - | - | 130 mm | 184 mm |
| HYDNUT475-HEAVY | FAG | - | - | - | - | 33 mm | - | - | - |
| HYDNUT395 | FAG | - | - | 34 mm | - | 37.6 mm | - | 135 mm | - |
| HYDNUT205 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT270 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT600-HEAVY | FAG | - | - | - | - | - | - | - | - |
| HYDNUT470 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT215 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT500 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT260-INCH | FAG | - | - | 55 mm | - | - | - | - | 225 mm |
| HYDNUT440-INCH | FAG | - | - | 45.8 mm | - | - | - | 134 mm | - |
| HYDNUT450-HEAVY | FAG | - | - | - | - | - | - | - | - |
| HYDNUT420 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT650 | FAG | - | - | - | - | 37.6 mm | - | - | 110 mm |
| HYDNUT170-INCH | FAG | - | - | - | - | - | - | - | - |
| HYDNUT375-HEAVY | FAG | - | - | - | - | 68.2 mm | - | - | 150 mm |
| HYDNUT335 | FAG | - | - | - | - | 31 mm | - | 86 mm | 63.5 mm |
| HYDNUT850 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT385 | FAG | - | - | - | - | - | - | - | - |
| HYDNUT165 | FAG | - | - | - | - | 30.2 mm | 31.85 kN | 137 mm | 105 mm |
| FAG HYDNUT290 Hydraulic nuts | Contact angle α:25 °; Nlim (oil):6,200 rpm; a:80 mm; ra max:2 mm; B:38 mm; D1:273.33 mm; Fatigue limit load, Cu:8.2 kN; D:300 mm; Radial rigidity:1,391 N/µm; r1s min:1 mm; |
| FAG HYDNUT470 Hydraulic nuts | Fit:J7; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Square flange shape; d:40; Accessory:No Cover; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):21300; |
| FAG HYDNUT375 Hydraulic nuts | Seals:VV (Non-Contact Rubb; Bearing Retained:No; RoHS:6; Bearing I.D. d(mm):10; Volume Discount:Available; Holder Surface Treatment:Clear Anodize; Shape:Flange Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |
| FAG HYDNUT170-INCH Hydraulic nuts | Bearing with/without cage:Avec; B3:11 mm; Cr:28.9 kN; F:30 mm; Characteristic rolling element frequency, BSF:12.92 Hz; Characteristic cage frequency, FTF:0.46 Hz; Minimum Buy Quantity:N/A; C0r:55 kN; n:8 mm; a:4 mm; |
| FAG HYDNUT460-INCH Hydraulic nuts | Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Days to Ship:7 Days; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Shape:Flange Type; Number of Bearings:Double; |
| KOYO NU1952 Single-row cylindrical roller bearings | precision rating:Not Rated; finish/coating:Uncoated; dynamic load capacity:29000 lb; d:85 mm; bore type:Round; static load capacity:22400 lbs; snap ring included:Without Snap Ring; internal clearance:C0; series:200W; closure type:Single Shield; |
| FAG HYDNUT710 Hydraulic nuts | Seals:ZZ (Double Shield); Volume Discount:Available; Width T(mm):80; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Double; Flange O.D. H(φ):104; |
| FAG HYDNUT260 Hydraulic nuts | H2:41 mm; Z:54.4 mm; T min.:-20 °C; Designation of housing:SP206-207/72N-; B:32 mm; SW:3 mm; Designation of bearing:US207G2T20; s1:16 mm; C0:15.2 kN; L:274 mm; |
| FAG HYDNUT610 Hydraulic nuts | Fatigue limit load, Cu:18 kN; Characteristic outer ring frequency, BPF0:7.73 Hz; Rating life coefficient, A2:1.4; Dynamic load, C:115 kN; e:0.34; Y2:1.79; B:29.32 mm; Y0:0.98; EAN:4547359534078; Characteristic rolling element frequency, BSF:6.79 Hz; |
| FAG HYDNUT850-HEAVY Hydraulic nuts | Bearing Unit, Type:Take-Up Type; Fit:J7; Accessory:No Cover; Basic Load Rating, Dynamic Rating(N):29100; Stroke:300; Surface Treatment:No; Machining:No; Unit Body Material:Shaped steel/Groove-; Unit, Type:Bearing Unit with Fr; |
| FAG HYDNUT625-HEAVY Hydraulic nuts | C0:11.2 kN; B:38.1 mm; Recommended tightening torque for set screw:3.7 Nm; E:18 mm; S:15.9 mm; H2:83 mm; J:60 mm; G:M6x1; C:19.5 kN; T min.:-20 °C; |
| FAG HYDNUT270 Hydraulic nuts | Days to Ship:8 Days; Category:Cam Followers; Surface Treatment:None; Shaft:None; Roller Lining:None; Thread Size on Cam Follower (M)(mm):M6; RoHS:6; h(mm):17 ～ 32; |
FAG HYDNUT275 Hydraulic nuts Video
FAG HYDNUT275-HEAVY bearing - BEST BEARING | BEST
Combined with the FAG HYDNUT275-HEAVY bearing , FAG HYDNUT275-HEAVY bearing has the most complete product outline in rolling bearing industry
FAG HYDNUT225-HEAVY bearing in Netherlands | Original
FAG HYDNUT275-HEAVY bearing high speed low noise are widely used in industrial drive, agriculture, compressors, motors and generators, construction,
HYDNUT275-HEAVY FAG • ABF Store
HYDNUT275-HEAVY FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in
FAG HYDNUT275-HEAVY Bearing | HYDNUT275-HEAVY
FAG HYDNUT275-HEAVY Bearing | HYDNUT275-HEAVY Series & Charlotte. The product information of the webpage is for reference only. I apologize for the
FAG HYDNUT275-HEAVY Bearing | Model: HYDNUT275
FAG HYDNUT275-HEAVY Bearing. FAG HYDNUT275-HEAVY Bearing,FAG HYDNUT275-HEAVY Australia,FAG bearings Middleman. • SKF FBSA 209/QBC
Hydraulic Nut HYDNUT - the Schaeffler Group
Application. FAG Hydraulic nuts HYDNUT are used to press parts with a tapered bore onto a tapered seat. They are mainly used if the drive-up forces required
FAG Hydraulic Nuts - Farrell Bearings
of FAG spherical roller bearings with tapered bore. 20 ... 6. 6. 16. 2: Holes in the press ring for easier handling of FAG hydraulic nuts ... HYDNUT275. Tr275~4