| FAG LOE248-N-AF-L Plummer block housings | D1:64.25 mm; Mass bearing:0.22 kg; Reference grease quantity Gref:3.4 cm³; r1,2 min.:1 mm; Basic static load rating C0:8.5 kN; Static axial stiffness, preload class B:65 N/µm; Db max.:70.8 mm; d:45 mm; Calculation factor f1:1; D:75 mm; |
| FAG KPGZ49/850-F-S Plummer block housings | B:9.00 mm; Fillet Radius rb:0.10 mm; Grease Speed Rating n1:51000 rpm; Fillet Radius ra:0.30 mm; D:32.0000 mm; d:15.000 mm; Oil Speed Rating n2:78000 rpm; Basic Dynamic Radial Load Rating C:6050 N; Basic Static Radial Load Rating Co:3150 N; |
| FAG LOE238-N-BF-L Plummer block housings | Appropriate attachment bolt size G:1 in; Lock washer:W 36; Bearing:23236 CC/W33; PG:1/4 NPT; db:198.438 mm; H1:190.5 mm; R1:114.3 mm; P60°:234 kN; Labyrinth ring (dc shaft position):LOR 154; S:4.763 mm; |
| FAG LOU540-AF-L Plummer block housings | Basic Static Radial Load Rating Co:47500 N; Oil Speed Rating n2:5600 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:4300 rpm; Basic Dynamic Radial Load Rating C:57200 N; B:33.30 mm; Accessories:One Seal & Snap-Ring; Sealed Speed Rating n3:4300 rpm; D:100.0000 mm; d:55.000 mm; |
| FAG LOU538-BF-L Plummer block housings | Calculation factor Y:1.5; a:17.055 mm; da max.:49 mm; r1,2 min.:3.5 mm; d:41.275 mm; Calculation factor e:0.4; Ca min.:4 mm; Da min.:65 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:84.2 kN; |
| FAG KPGZ49/1120-F-S Plummer block housings | Phase shift output signal tolerance ±:30 °; Limiting speed:300 r/min; Phase shift output signal:90 °; Number of pulses per revolution N:256; Mass sensor unit:0.57 kg; Period accuracy ±:8 %; Duty cycle tolerance ±:10 %; Cable connector type:AMP Superseal; Duty cycle:50 %; |
| FAG KPG49/800-F-S Plummer block housings | b1:19 mm; d2:120 mm; r1s (min):2.1 mm; rs (min):2.1 mm; F:144 mm; D:215 mm; Dynamic (Ca):261 kN; s:2.5 mm; d2 (max):154.5 mm; b:11 mm; |
| FAG LOE544-N-BF-L Plummer block housings | with tapered bore:1319 ; Oil:3 000 min-1; d:95 mm; D:200 mm; B1:48 mm; with cylindrical bore:3 500 min-1; Grease:1.900 kN; Pu:51.100 kN; B:45 mm; rs Dynamic (Cr):3 mm; |
| FAG KPGZ49/1180-F-S Plummer block housings | End cover:ECY 205; Fatigue load limit Pu:0.335 kN; Housing:FY 505 M/VZ033; Basic dynamic load rating C:14 kN; B1:44.4 mm; L:95 mm; RG:1/4-28 UNF; Housing material:Cast iron; Recommended diameter for attachment bolts, inch G:0.375 in; N4:4 mm; |
| FAG LOE244-N-BF-L Plummer block housings | d2 ≈:174 mm; Calculation factor Y0:2.8; Ba min.:15 mm; b:13.9 mm; Basic dynamic load rating C:899 kN; Calculation factor Y1:2.8; r1,2 min.:3 mm; db min.:160 mm; Da max.:256 mm; K:7.5 mm; |
| FAG LOU332-BF-L Plummer block housings | Basic Dynamic Radial Load Rating C:78100 N; B:36.50 mm; d:60.000 mm; Sealed Speed Rating n3:3800 rpm; Basic Static Radial Load Rating Co:88000 N; Grease Speed Rating n1:3800 rpm; D:110.0000 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:1.50 mm; Accessories:One Shield; |
| FAG KPG49/1000-F-S Plummer block housings | B:5.00 mm; d:10.000 mm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Dynamic Radial Load Rating C:1820 N; Basic Static Radial Load Rating Co:930 N; Fillet Radius ra:0.30 mm; D:19.0000 mm; Sealed Speed Rating n3:20000 rpm; Oil Speed Rating Open/Shielded n2:43000 rpm; |