| 75068A Franke Slewing Ring Bearings | Flange Dia. (Dfl pm 0.5):140.000; Shaft Dia., Nominal (d):120.0000; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Outside Diameter, Nominal(Do):125.000; Bore Diameter (mm):120; Housing Bore Dia. (Dh) - 125 +0.040 / -0:125 +0.040 / 0; Flange Thickness (Sfl):2.500; Bearing Bore after Mounting (di) - 120 +0.087 / -0:120 +0.087 / 0; ID Chamfer Angle (B deg.):45; Material:Wrapped bronze with; |
| 1 1712 Rollix Slewing Ring Bearings | Cu:404; C:118 mm; Size (mm):460x620x118; Grease lub.:370; r min.:4 mm; (Oil) Lubrication Speed:500 r/min; Basic static load rating (C0):5350 kN; Weight:107 Kg; Basic dynamic load rating (C):2330 kN; ra(max):3; Cr:2890; da(min):478; Calculation factor (Y0):3,8; (Refer.)Mass(kg):107; C0r:5350; Bearing No.:23992R; e:0.17; Oil lub.:500; Da(max):602; Calculation factor (Y1):3,89; |
| 1 2040 03 Rollix Slewing Ring Bearings | d:15,000 mm; Size (mm):15x42x13; D:42,000 mm; Width (mm):13,000; C:13,000 mm; Bearing number:6302; Outer Diameter (mm):42,000; Bore Diameter (mm):15,000; B:13,000 mm; |
| 73027L Franke Slewing Ring Bearings | W:35 mm; Angle:15 °; B:25 mm; Bore Diameter (mm):25; F:105 mm; d:25 mm; N:42 mm; D:70 mm; C:14 mm; H:25,3 mm; Db:47,62 mm; P:50 mm; Bearing number:HRT25; S:43 mm; Thread (TH):M24×2,0; O:32,3 mm; L:54 mm; |
| 6 0307 Rollix Slewing Ring Bearings | N2:2,5 mm; Dn:37,5 mm; Fw:25 mm; L:58 mm; B3:1 mm; Basic dynamic load rating (C):2,95 kN; BL2:1,85 mm; Bore Diameter (mm):25; Outer Diameter (mm):40; L2:43,7 mm; Angle (X):62; D:40 mm; Weight:0,19 Kg; Bearing number:KBS25-PP; |
| 22 0541 01 Rollix Slewing Ring Bearings | Inventory:0.0; Weight:0.220 Kg; Precision Class:Non-Precision; Height:0.709 Inch | 18 Mill; Manufacturer Item Number:51207BNLS; Product Group:B00308; Size (mm):35x62x18; Width (mm):18; Inch - Metric:Metric; Thrust Bearing:Yes; Outer Diameter (mm):62; Component Description:Roller Assembly Plus; Bore 1:1.378 Inch | 35 Mill; Category:Thrust Ball Bearings; Bore 2:1.457 Inch | 37 Mill; Banded:No; Overall Height with Aligning Washer:0 Inch | 0 Millimete; |
| 73004L Franke Slewing Ring Bearings | d:90 mm; Calculation factor (e):0,17; da min.:99 mm; Basic static load rating (C0):23,5 kN; Da max.:151 mm; rs min:2 mm; r min.:2 mm; Calculation factor (Y0):3,9; Size (mm):90x160x30; ra max:2 mm; Dynamic load, C:57.5 kN; Static load, C0:23.5 kN; Nlim (oil):4,300 rpm; ra max.:2 mm; D:160 mm; Y0:3.9; Mass:2.55 kg; Calculation factor (Y1):3,8; Da max:151 mm; Weight:2,55 Kg; |
| 73015L Franke Slewing Ring Bearings | Calculation factor - f1:0.97; rb max.:0.3 mm; d2:93.2 mm; Size (mm):110x85x13; Reference grease quantity Gref:2.7 cm³; Mass bearing:0.27 kg; Calculation factor - fHC:1; dn:94.1 mm; Calculation factor (single, tandem) Y2:0.87; Preload class B:296 N/micron; Calculation factor f:1.31; Limiting speed for oil lubrication:16000 mm/min; Preload class C:406 N/micron; Da - max.:105.4 mm; Calculation factor - e:0.68; |
| 28 0941 01 Rollix Slewing Ring Bearings | UNSPSC:31171504; Fillet Radius/Chamfer:2.1 mm; Precision Class:ABEC 1 | ISO P0; Noun:Bearing; Radial Clearance:0.012 to 0.036 mm; Bore Diameter (mm):100; Limiting Speed - Grease:3,600 rpm; C:34 mm; Bearing number:6220ZZ; Maximum Capacity / Filling Slot:No; Configuration:Single Row; Weight:3.14 Kg; Inventory:0.0; Outer Race Width:1.339 Inch | 34 Mill; Internal Special Features:No; Width (mm):34; Cage Material:Steel; |
| 75033A Franke Slewing Ring Bearings | Wall Thickness (S3):2.430; Bore Diameter (mm):50; Bearing Outside Diameter, Nominal(Do):55.000; Bearing Length, Nominal (B):40.000; Housing Bore Dia. (Dh) - 55 +0.030 / -0:55 +0.030 / 0; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Lube Hole Dia. (dl):8.000; Average Clearance (Cd):0.1780; Shaft Dia., Nominal (d):50.0000; OD Chamfer Length (Co):1.800; ID Chamfer Length (Ci):0.600; Material:Copper plated steel; |